/* =========================================================================
   RISHØJ & DE LORENZO — design system
   Concept stage. One dark house style, with light sections used as breath.
   ========================================================================= */

/* --- tokens --------------------------------------------------------------- */
/* The site stands in the room. The four --room-* values below are the palette;
   this maps them onto the semantic tokens everything else uses.
   The one exception is the threshold — see .tone-threshold. */
:root{
  --ink:        var(--room-ink);
  --ink-soft:   var(--room-secondary);
  --ink-faint:  var(--room-faint);
  --ink-hair:   var(--room-hairline);
  --bg:         var(--room-ground);
  --bg-raise:   var(--room-plate);
  --bg-plate:   var(--room-plate);

  --shell:      clamp(20px, 4.4vw, 72px);
  --gap:        clamp(14px, 1.6vw, 26px);
  --maxw:       1680px;

  --step:       clamp(64px, 9vh, 132px);   /* vertical rhythm between blocks */
  --chapter:    clamp(110px, 16vh, 230px); /* between chapters               */

  --ease:       cubic-bezier(.22,.61,.36,1);
  --ease-io:    cubic-bezier(.65,.05,.36,1);
  --hair:       1px solid var(--ink-hair);
}

/* --- the room ---------------------------------------------------------------
   Sampled from photographs of the RDL showroom (`RdL indefra/`, Aug 2026): a
   converted industrial hall that is LIGHT — white painted brick, white
   plinths, polished concrete, glass-block daylight — with the ceiling as the
   only dark element.

   Hue and saturation are the room's, measured off the photographs. Lightness
   is set for a screen: a wall reads as white to the eye even where a
   photograph of it in shade measures 73%. Measured then set:

     ground     brick wall     26°  S 5%   ->  L 96%
     ink        ceiling         —   near-black -> L 16.5%, charcoal
     secondary  concrete floor 34°  S 10%  ->  L 40%
     hairline   galvanised     210° S 10%  ->  L 72%

   Contrast on the ground: ink 13.13:1, secondary 5.11:1, faint 4.59:1 — all
   AA or better. The hairline is 1.85:1 and is a rule, never text.

   These four are the palette. `.tone-room` below maps them onto the semantic
   tokens; moving that mapping into :root is the single change that would take
   the whole site light. */
:root{
  --room-ground:    #F7F5F3;   /* painted brick        */
  --room-ink:       #2D2927;   /* ceiling, charcoal    */
  --room-secondary: #6E675E;   /* concrete floor       */
  --room-faint:     #756E66;   /* concrete, lightened  */
  --room-hairline:  #B0B8BF;   /* galvanised steel     */
  --room-plate:     #EBE8E5;   /* a frame with no image yet */
  /* accent: none. The clothing is the colour. */
}

/* The threshold. Daylight outside, darkness in the doorway, daylight inside —
   which is what the building does. The doorway is the only part of the journey
   that is dark, so it is the only scope that keeps the old ground. */
.tone-threshold{
  --ink:        #f4f2ef;
  --ink-soft:   rgba(244,242,239,.66);
  --ink-faint:  rgba(244,242,239,.38);
  --ink-hair:   rgba(244,242,239,.16);
  --bg:         #000000;
  --bg-raise:   #0d0d0d;
  --bg-plate:   #161616;
  --hair:       1px solid var(--ink-hair);
}

/* Kept so an explicit opt-in still reads, though :root now carries the room. */
.tone-room{
  --ink:        var(--room-ink);
  --ink-soft:   var(--room-secondary);
  --ink-faint:  var(--room-faint);
  --ink-hair:   var(--room-hairline);
  --bg:         var(--room-ground);
  --bg-raise:   var(--room-plate);
  --bg-plate:   var(--room-plate);
  --hair:       1px solid var(--ink-hair);
  background:var(--bg); color:var(--ink);
}

/* a light chapter: same system, inverted */
.tone-light{
  --ink:        #171613;
  --ink-soft:   rgba(23,22,19,.68);
  --ink-faint:  rgba(23,22,19,.42);
  --ink-hair:   rgba(23,22,19,.18);
  --bg:         #e9e6e0;
  --bg-raise:   #e2ded7;
  --bg-plate:   #d9d5cd;
  background:var(--bg); color:var(--ink);
}

/* --- reset ---------------------------------------------------------------- */
*{margin:0;padding:0;box-sizing:border-box}
/* No scroll-behavior:smooth here. ScrollTrigger measures pins by scrolling to
   the top and back; if the browser animates that, every pinned trigger comes
   back with the wrong start. In-page jumps are handled in JS instead. */
html{background:var(--room-ground);-webkit-text-size-adjust:100%}
body{
  background:var(--bg); color:var(--ink);
  font-family:"Helvetica Neue","Inter",system-ui,-apple-system,"Segoe UI",sans-serif;
  font-weight:300; line-height:1.5;
  -webkit-font-smoothing:antialiased; text-rendering:optimizeLegibility;
  overflow-x:clip;
}
img,svg,video{display:block;max-width:100%}
a{color:inherit;text-decoration:none}
button{font:inherit;color:inherit;background:none;border:0;cursor:pointer}
::selection{background:var(--ink);color:var(--bg)}

/* --- type ----------------------------------------------------------------- */
.display{
  font-weight:200; line-height:.94; letter-spacing:-.015em;
  font-size:clamp(2.6rem, 7.4vw, 7.4rem);
}
.display--sm{ font-size:clamp(2rem, 4.4vw, 3.9rem); line-height:1.02 }
.display--xl{ font-size:clamp(3.2rem, 11vw, 12rem); line-height:.88 }

.lede{
  font-size:clamp(1.02rem, 1.5vw, 1.42rem); font-weight:300;
  line-height:1.62; color:var(--ink-soft); max-width:46ch;
}
.body{ font-size:clamp(.94rem,1.08vw,1.06rem); line-height:1.78; color:var(--ink-soft); max-width:62ch }
.body + .body{ margin-top:1.4em }

.label{
  font-size:.605rem; font-weight:400; letter-spacing:.34em; text-indent:.34em;
  text-transform:uppercase; color:var(--ink-faint);
}
.label--ink{ color:var(--ink) }
.num{ font-variant-numeric:tabular-nums; letter-spacing:.14em }

.link{
  position:relative; display:inline-block; padding-bottom:.35em;
  font-size:.66rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase;
}
.link::after{
  content:""; position:absolute; left:0; bottom:0; height:1px; width:100%;
  background:currentColor; opacity:.36;
  transform:scaleX(1); transform-origin:right; transition:transform .55s var(--ease), opacity .35s;
}
.link:hover::after{ transform:scaleX(0); }
.link .arw{ display:inline-block; transition:transform .5s var(--ease) }
.link:hover .arw{ transform:translateX(.5em) }

/* --- layout --------------------------------------------------------------- */
.shell{ width:100%; max-width:var(--maxw); margin-inline:auto; padding-inline:var(--shell) }
.grid{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap) }
.chapter{ padding-block:var(--chapter); position:relative }
.chapter--tight{ padding-block:var(--step) }
.rule{ height:1px; background:var(--ink-hair); width:100% }
.stack > * + *{ margin-top:var(--step) }

/* end-only, so a start-* offset composes instead of collapsing the span */
.col-2{grid-column-end:span 2}.col-3{grid-column-end:span 3}.col-4{grid-column-end:span 4}
.col-5{grid-column-end:span 5}.col-6{grid-column-end:span 6}.col-7{grid-column-end:span 7}
.col-8{grid-column-end:span 8}.col-9{grid-column-end:span 9}.col-12{grid-column-end:span 12}
.start-2{grid-column-start:2}.start-3{grid-column-start:3}.start-4{grid-column-start:4}
.start-5{grid-column-start:5}.start-6{grid-column-start:6}.start-7{grid-column-start:7}
.start-8{grid-column-start:8}.start-9{grid-column-start:9}
.start-10{grid-column-start:10}.start-11{grid-column-start:11}

/* --- chapter heading ------------------------------------------------------- */
.chead{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap); align-items:end }
.chead__meta{ grid-column:1 / span 3 }
.chead__title{ grid-column:4 / span 9 }
.chead__lede{ grid-column:4 / span 5; margin-top:2.2em }
/* With no label in the margin the heading has nothing to be indented past,
   and three empty columns in front of it read as a missing element rather
   than as air. Retail lost its label on 27 Oct and is the only chapter head
   in this state today. */
.chead:not(:has(.chead__meta)) .chead__title{ grid-column:1 / span 9 }
.chead:not(:has(.chead__meta)) .chead__lede { grid-column:1 / span 5 }
.chead + *{ margin-top:var(--step) }

/* --- media ---------------------------------------------------------------- */
.media{ position:relative; overflow:hidden; background:var(--bg-plate) }
.media img{ width:100%; height:100%; object-fit:cover }
.media--parallax img{ height:118%; position:absolute; inset:0; will-change:transform }
.media figcaption,.cap{
  margin-top:1.1em; font-size:.605rem; letter-spacing:.24em; text-indent:.24em;
  text-transform:uppercase; color:var(--ink-faint);
}
.r-11{aspect-ratio:1/1}.r-45{aspect-ratio:4/5}.r-34{aspect-ratio:3/4}
.r-916{aspect-ratio:9/16}.r-32{aspect-ratio:3/2}.r-43{aspect-ratio:4/3}.r-169{aspect-ratio:16/9}.r-219{aspect-ratio:21/9}.r-23{aspect-ratio:2/3}

/* ---- a frame that changes in place --------------------------------------
   Every frame is stacked in the same box and only opacity moves. Nothing is
   translated or scaled, so there is no motion to catch the eye — the picture
   is simply a different picture the next time you look at it.

   The first frame is opaque by CSS, so with no script at all the figure is a
   photograph rather than an empty box. cycle.js writes data-cycle-on to every
   frame at boot, which takes over from the :first-of-type default without a
   frame in between where both or neither are visible. */
.cyc{ position:relative }
.cyc__f{ position:absolute; inset:0; width:100%; height:100%; object-fit:cover;
  opacity:0; transition:opacity 1050ms var(--ease) }
.cyc__f:first-of-type{ opacity:1 }
.cyc__f[data-cycle-on="1"]{ opacity:1 }
.cyc__f[data-cycle-on="0"]{ opacity:0 }

/* ONE ARROW UNDER THE FRAME, WHERE THE MARKUP ASKS FOR IT. Emilio, 26 Oct
   2026: "der skal ogsaa vaere en lille pil man kan trykke paa saa man selv
   kan skifte til naeste billede." cycle.js builds it, so it exists only when
   it can work. It sits under the picture at its right edge rather than on top
   of it -- nothing else on this site puts a control over a photograph -- and
   it is a 44px target with a 24px arrow inside, so the air is the hit area
   and not the drawing. */
.cyc__next{
  display:block; margin-left:auto; margin-top:.7em;
  width:44px; height:44px; padding:10px;
  color:var(--ink-soft); background:none; border:0; cursor:pointer;
  transition:color .45s var(--ease), transform .45s var(--ease);
}
.cyc__next svg{ display:block; width:24px; height:16px }
.cyc__next:hover{ color:var(--ink); transform:translateX(3px) }
.cyc__next:focus-visible{ outline:1px solid var(--ink); outline-offset:3px }
/* BOTH DIRECTIONS, 10 Nov 2026. The pair sits where the single arrow sat —
   at the right-hand end under the frame — so a page that had one arrow has
   not grown a new piece of furniture, it has grown a second arrow. The back
   one leans the other way on hover for the same reason the forward one
   leans: the movement is the whole feedback. */
.cyc__nav{ display:flex; justify-content:flex-end; gap:.1em; margin-top:.7em }
.cyc__nav .cyc__next{ margin:0 }
.cyc__prev:hover{ transform:translateX(-3px) }
@media (prefers-reduced-motion: reduce){
  .cyc__next{ transition:none }
  .cyc__next:hover, .cyc__prev:hover{ transform:none }
}

/* ---- the PR area --------------------------------------------------------
   Three portrait frames, entering at their own offsets and their own times.
   Three is the whole set; the row is sized for three and does not stretch to
   look like more. */
/* ---- the room replaces the wall -----------------------------------------
   Seven crops of one 1484px facade photograph used to carry these sections,
   several of them upscaled past their own source. They are gone. What stands
   in their place is a real interior, and a 3:4 interior cannot go in a 21:9
   band without the crop this project does not allow — so the full-bleed band
   is a bounded portrait instead. The picture keeps its own shape; the layout
   gives way. */
.phero__one{ max-width:min(42vw, 560px) }
/* A landscape in the same slot (about.html, the facade). 560 is a portrait's
   width; a 7:5 picture at 560 is 400 tall and reads as a thumbnail. 742 is
   its 1484px source at DPR 2, and not a pixel past it. */
@media (max-width:820px){ .phero__one{ max-width:none } }

/* THE OPENING IS TWO PICTURES ON SHOWROOM. Emilio, 26 Oct 2026: "ryk billedet
   med mie op paa hoejre side af the showroom billedet oppefra." Both keep
   .phero__one's 560 -- he asked for them the same size back on 23 Oct -- and
   the pair is pushed to the two ends of the measure rather than left to sit
   in the left half with 150px of nothing after it. The caption runs under
   the pair, under the first picture, where it was. */
.phero__pair{ display:flex; justify-content:space-between; align-items:flex-start;
  gap:var(--gap); flex-wrap:wrap }
.phero__pair > .media{ flex:0 1 min(42vw, 560px) }
.phero__pair > .cap{ flex:1 0 100%; margin-top:0 }
@media (max-width:820px){
  .phero__pair{ display:block }
  .phero__pair > .media + .media{ margin-top:clamp(20px,4vh,44px) }
}

/* ---- the name on the door (about.html) ------------------------------------
   Emilio's mockup, built: the gable blurred and dark behind a centred white
   title. The picture is baked dark (tools/build-rdl-hero.py), so the type is a
   fixed light ink rather than a palette token -- this block is dark on every
   ground. Measured against the worst pixel behind each line: see
   PROJECT-HANDOVER §4x0. */
.rdlhero{
  --rdl-ink:#F4F2EF;
  position:relative; isolation:isolate; overflow:hidden;
  min-height:100vh; min-height:100svh;
  display:grid; place-items:center; text-align:center;
  padding:clamp(96px,14vh,150px) var(--shell) clamp(72px,11vh,120px);
  background:#1d1c1b;                  /* what shows before the picture loads */
  color:var(--rdl-ink);
}
.rdlhero__bg, .rdlhero__bg img{ position:absolute; inset:0; width:100%; height:100%; z-index:-1 }
.rdlhero__bg img{ object-fit:cover; object-position:50% 50%; display:block }
/* A soft shadow behind the type, and only behind it. Without it the title
   measured 3.53:1 at 1440x900: the pale sign band over the door sits right
   under "on the door." Darkening the whole picture to fix one band would lose
   the sky the mockup keeps, so the shade is an ellipse centred on the text and
   gone by its edge. Its alpha and shape are part of the contrast measurement. */
.rdlhero::before{ content:""; position:absolute; inset:0; z-index:-1; pointer-events:none;
  background:radial-gradient(ellipse 46% 40% at 50% 52%, rgba(0,0,0,.42), rgba(0,0,0,0) 100%) }
.rdlhero .rdlhero__t{ color:var(--rdl-ink); margin:0 }
.rdlhero__rule{ display:block; width:clamp(56px,6.2vw,92px); height:1px;
  margin:clamp(30px,4.6vh,52px) auto; background:var(--rdl-ink) }
.rdlhero__line{ margin:0;
  font-size:clamp(.68rem,.98vw,.9rem); font-weight:400; line-height:1.6;
  letter-spacing:.42em; text-indent:.42em; text-transform:uppercase }
.rdlhero__dot{ display:inline-block; margin-inline:1.3em }
@media (max-width:820px){
  .rdlhero__line{ letter-spacing:.32em; text-indent:.32em }
  .rdlhero__dot{ margin-inline:.8em }
}
/* the rest of the old hero, under the picture: a chapter, not a second hero */
.phero.phero--after{ padding-top:var(--step) }   /* .phero's own 22vh is later in this file; this has to outrank it */
/* the roster on its own, centred and larger (about.html) */
.phero.phero--roster{ text-align:center; padding-block:var(--step) }
.phero--roster .phero__rot{ margin-top:1.4em; justify-content:center;
  font-size:clamp(1.35rem, 2.9vw, 2.9rem); line-height:1.3; column-gap:.34em }

/* THE PR AREA AND THE LOUNGE ARE NOT CHAPTERS ANY MORE. Emilio, 26 Oct 2026:
   "slet pr billeder tekst... lig dem op i rullen... det samme med loungen."
   Their three frames went into the gallery rail, which already sizes and
   spaces its own children, so .pr__set, .pr__f, .lng__set and .lng__solo are
   gone rather than left behind as rules nothing matches. */

/* The cart is a brand object, not architecture, so it does not go in the
   rail with the interiors: one frame directly under it, on its own, centred,
   at the rail's own measure so it does not take more room than the pictures
   above it. The label sits over it, centred with it, because a label pinned
   to the left margin would put the frame off-centre on the page. */
.cart{ display:flex; flex-direction:column; align-items:center;
  gap:clamp(10px,1.4vh,18px) }
.cart__meta{ text-align:center }
/* The cart and the turning Wolford spinner, side by side: two brand objects
   rather than architecture, one still and one moving. THEY ARE THE SAME
   HEIGHT, not the same width -- 3:4 beside 9:16 matched on width would make
   the film tower over the cart. 0.75 of the cart's width is what equal
   height comes to, and the arithmetic is here rather than in a number
   somebody has to keep in step. */
.cart__row{ display:flex; justify-content:center; align-items:flex-start;
  gap:clamp(18px,2.6vw,44px); width:100% }
.cartfig{ width:clamp(240px, 27vw, 420px); flex:0 0 auto }
.cartfilm{ width:calc(0.75 * clamp(240px, 27vw, 420px)); flex:0 0 auto; margin:0 }
.cartfilm video{ display:block; width:100%; height:100%; object-fit:cover }
@media (max-width:820px){
  .cart__row{ flex-direction:column; align-items:center;
    gap:clamp(20px,4vh,40px) }
  .cartfig{ width:100% }
  .cartfilm{ width:75% }
}

@media (prefers-reduced-motion: reduce){
  /* The cycle stops on its first frame and the cross-fade is not animated.
     Both sets stay fully visible — nothing here hides a photograph. */
  .cyc__f{ transition:none }
  .cyc__f:first-of-type{ opacity:1 }
}

/* placeholder plate — everywhere final imagery is still missing */
.ph{
  position:relative; background:
    repeating-linear-gradient(135deg, rgba(45,41,39,.05) 0 2px, rgba(0,0,0,0) 2px 9px),
    var(--bg-plate);
  border:var(--hair); display:grid; place-items:center; text-align:center; overflow:hidden;
}
.tone-light .ph{ background:
    repeating-linear-gradient(135deg, rgba(0,0,0,.03) 0 2px, rgba(0,0,0,0) 2px 9px),
    var(--bg-plate); }
.ph__in{ padding:2em; display:grid; gap:.9em; justify-items:center }
.ph__k{ font-size:.58rem; letter-spacing:.34em; text-indent:.34em; text-transform:uppercase; color:var(--ink-faint) }
.ph__t{ font-size:clamp(.8rem,1.3vw,1rem); font-weight:300; letter-spacing:.06em; color:var(--ink-soft); max-width:24ch }
/* A placeholder that is still pending but no longer dead: it says where the
   building is and hands the visitor to their own map app. The hatching and
   hairline stay, so it still reads as something waiting for artwork. */
/* A film at its own 16:9, held so the frame cannot collapse before metadata. */
.doorfilm{ margin:clamp(20px,3vh,34px) 0 0 }

/* Contact's hero runs the door film level with the introduction. Rows are
   stated rather than left to auto-placement: the label and the headline share
   the first row, the lede has the second, and the film spans both and sits on
   their baseline. */
.phero--film .phero__meta{ grid-column:1 / span 3; grid-row:1 }
.phero--film .phero__t   { grid-column:4 / span 4; grid-row:1 }
.phero--film .phero__lede{ grid-column:4 / span 4; grid-row:2 }
.phero__film{ grid-column:8 / span 5; grid-row:1 / span 2; align-self:end; margin:0 }
@media (max-width:1080px){
  .phero--film .phero__meta,.phero--film .phero__t,.phero--film .phero__lede,
  .phero__film{ grid-column:span 12; grid-row:auto }
  .phero__film{ margin-top:clamp(24px,4vh,48px) }
}
.doorfilm video{ display:block; width:100%; height:auto; aspect-ratio:16 / 9;
  background:var(--bg-plate); object-fit:cover }

.ph--map .ph__in{ gap:1.1em }
.ph__addr{ font-style:normal; font-size:.78rem; line-height:1.7; letter-spacing:.04em;
  color:var(--ink) }
.ph__go{ font-size:.605rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase;
  color:var(--ink-soft); border-bottom:1px solid var(--ink-hair); padding-bottom:.35em;
  transition:color .4s var(--ease), border-color .4s var(--ease) }
.ph__go:hover{ color:var(--ink); border-color:var(--ink) }
.ph__go .out__mark{ margin-left:.55em }
/* The 21:9 block on the showroom page is short; the address would crowd it. */
.ph.r-219 .ph__in{ gap:.8em }
.ph.r-219 .ph__addr{ font-size:.72rem; line-height:1.55 }

/* ---- the address, on the building ---------------------------------------
   The facade photograph carries the address instead of a map. Grayscale with
   a small contrast lift, so it reads the way the facade reads everywhere else
   on the site, and object-position pushes the crop down to keep the entrance
   in frame.

   The gradient is what makes the type legible, so its stops are a measured
   value and not a taste: see the figures recorded in PROJECT-HANDOVER 5c. */
.locard{ position:relative; overflow:hidden; margin:0;
  background:var(--bg-plate); isolation:isolate }
/* LIGHTER THAN IT WAS. The photograph carried contrast(1.08) and the wash on
   top reached rgba(20,18,17,.72), which put the type on a background around
   rgb(76) — legible at 8.7:1, and far darker than the building actually is.
   The picture is lifted and the wash pulled back; the type stays white because
   the measurement still allows it. See PROJECT-HANDOVER for the numbers. */
.locard img{ position:absolute; inset:0; width:100%; height:100%;
  object-fit:cover; object-position:50% 62%;
  filter:grayscale(1) contrast(.98) brightness(1.10) }
.locard::after{ content:''; position:absolute; inset:0; z-index:1;
  background:linear-gradient(90deg,
    rgba(20,18,17,.60) 0%, rgba(20,18,17,.37) 42%,
    rgba(20,18,17,.05) 78%, rgba(20,18,17,0) 100%) }
.locard__in{ position:absolute; z-index:2; left:0; right:0; bottom:0;
  display:grid; justify-items:start; gap:1.05em;
  padding:clamp(22px,2.6vw,38px) }
.locard__k{ font-size:.605rem; letter-spacing:.3em; text-indent:.3em;
  text-transform:uppercase; color:#fff }   /* was .9 alpha: it only cost contrast */
.locard__addr{ font-style:normal; color:#fff;
  font-size:clamp(1rem,1.5vw,1.32rem); font-weight:200; line-height:1.42;
  letter-spacing:.01em }
.locard__go{ font-size:.605rem; letter-spacing:.3em; text-indent:.3em;
  text-transform:uppercase; color:#fff;
  border-bottom:1px solid rgba(255,255,255,.42); padding-bottom:.4em;
  transition:border-color .4s var(--ease) }
.locard__go:hover{ border-color:#fff }
.locard__go .out__mark{ margin-left:.55em }

/* A left-anchored plate does not survive a phone width: at 390 the type would
   run past the point where the gradient has already let go. Bottom-up
   instead, which is measured against the same crop the phone actually shows. */
@media (max-width:820px){
  /* The label sits at 66-69% of the card, the address at 73-87%, the link at
     91-95% — measured, not assumed. The ramp reaches its full strength by 64%
     so the label has a background to stand on, and the bottom END is lighter
     than it was (.62 against .68): the darkest part of the card is where the
     type had the most contrast to spare. */
  .locard::after{ background:linear-gradient(180deg,
    rgba(20,18,17,.06) 0%, rgba(20,18,17,.30) 36%,
    rgba(20,18,17,.60) 64%, rgba(20,18,17,.62) 100%) }
}
.ph::after{
  content:""; position:absolute; inset:0; pointer-events:none;
  background:linear-gradient(140deg, rgba(45,41,39,.04), rgba(0,0,0,0) 46%);
}

/* Shown only after Send has been pressed: an enquiry that went nowhere has to
   say so, and say where to send it instead. */
.fallback{ font-size:.86rem; line-height:1.6; color:var(--ink-soft);
  border-left:1px solid var(--ink-hair); padding-left:1.1em; max-width:46ch }

/* WHAT THE SERVER SAID. Same measure and same rule as the fallback above it,
   because they are the same kind of line; only the colour of the rule says
   which it is, and the words carry the rest. Never red: a form that failed is
   not an alarm, and this type is too light to shout in. */
.fstatus{ font-size:.86rem; line-height:1.6; color:var(--ink);
  border-left:1px solid var(--ink); padding-left:1.1em; max-width:46ch }
.fstatus[data-state="bad"]{ color:var(--ink-soft); border-left-color:var(--ink-hair) }

/* THE HONEYPOT. Off-screen rather than display:none: a robot that reads the
   stylesheet skips what is not rendered, and this has to look rendered. It is
   aria-hidden and out of the tab order in the markup, so nobody using the page
   can reach it by eye, by keyboard or by screen reader. */
.hp{ position:absolute; left:-9999px; width:1px; height:1px;
  overflow:hidden; opacity:0; pointer-events:none }

/* --- site header ----------------------------------------------------------- */
.hdr{
  position:fixed; inset:0 0 auto 0; z-index:60;
  display:flex; align-items:center; justify-content:space-between;
  gap:var(--gap); padding:clamp(18px,2.2vh,30px) var(--shell);
  color:var(--ink);
  transition:transform .6s var(--ease), opacity .5s var(--ease);
}
/* THE HEADER IS PRESENT FROM THE FIRST FRAME. It used to be veiled through
   the whole opening, which meant that anyone evaluating the company — a brand
   considering representation, a bank, a partner — had to scroll through a
   building to find Contact. The opening is still there for anyone who scrolls;
   it is no longer the only way in.

   Its tone is derived from the luminance actually behind it, the same
   mechanism the scroll cue uses — see tuneOver() in opening.js. Ink type would
   vanish against the shopfront glass exactly as the cue did, at 1.31:1. */
.hdr{ --hdr-ink:#e8e6e4; --hdr-halo:rgba(12,11,10,.86) }

/* WHEN THE CANVAS CANNOT BE READ, the header stops guessing an ink and takes a
   ground. Opening a page from disk taints the canvas: getImageData throws,
   tuneHeader never runs, and the light default stands for the whole opening —
   measured at the top of the front page, ink rgb(232,230,228) on a roofline of
   rgb(233,233,233), which is 1.03:1. The type was there and could not be seen.

   A fixed colour cannot fix it: behind the header the photograph runs from 240
   at the roof to 4 in the glazing. A scrim can, because it only ever darkens —
   it gives the light ink a ground on the bright half and barely shows on the
   dark one. It appears ONLY in this fallback; where sampling works, nothing
   changes. */
/* SCOPED THE SAME WAY THE INK IS — only while the PHOTOGRAPH is behind the
   header. Left unscoped it also lay over the plate, and the plate's ink is
   dark: a dark scrim under dark type made the navigation unreadable over the
   brand sequence, which is worse than the problem it was added to fix. Once
   the plate is on there is nothing to guess about — the header has a ground of
   its own and needs no help. */
body:has(.opening) .hdr[data-blind="1"]:not([data-plate="1"])::before{
  content:''; position:absolute; inset:0; z-index:-1; pointer-events:none;
  background:linear-gradient(180deg,
    rgba(12,11,10,.80) 0%, rgba(12,11,10,.64) 62%, rgba(12,11,10,0) 100%);
}
body:has(.opening) .hdr[data-blind="1"]:not([data-plate="1"]){ color:var(--hdr-ink) }
/* Over the opening the header takes the derived tone — and it takes it whether
   or not the script runs. Gating this on a data attribute the script sets meant
   that with JavaScript disabled, or on a tainted canvas where sampling is
   refused, the header fell back to page ink over a photograph. The default is
   now the light end, which is the one that survives the shopfront glass; the
   script only ever refines it. :has() rather than a marker class, so
   chrome.py can emit identical markup on every page. */
/* ...and only while the photograph IS the background. Once the plate is on,
   what is behind the type is the plate, not the canvas — but the tuning kept
   solving against the canvas, which by then is a black field. Measured over
   the brand sequence: --hdr-ink was rgb(149,149,149), solved for a sampled
   luminance of 0.0000, and painted onto an #F7F5F3 plate. 2.23:1. */
body:has(.opening) .hdr:not([data-plate="1"]){
  /* No indirection: the items inherit this colour rather than reading it back
     through a second variable. Measured, a descendant's `color:var(--x)` did
     not re-resolve when --x changed on the ancestor — --nav-ink read
     rgb(255,255,255) on the item while its computed colour stayed at the
     rgb(51,51,51) it had at p 0. Inheritance updates; that indirection did
     not. */
  color:var(--hdr-ink);
  text-shadow:0 0 16px var(--hdr-halo), 0 1px 7px var(--hdr-halo);
  /* The tone is re-solved as the camera moves, and through the approach it
     crawls one step of 1/255 at a time -- but at the crossing, where the
     frame goes from the lit facade to the dark interior, it has to flip from
     near-black to white in a single step. Eased, that flip is the type
     changing with the light; unaneased it is a glitch. Nothing else here
     animates colour, so this costs one repaint where it fires. */
  transition:color .24s linear, text-shadow .24s linear;
}
@media (prefers-reduced-motion: reduce){
  body:has(.opening) .hdr:not([data-plate="1"]){ transition:none }
}
/* Quiet elsewhere: a hairline and a ground at low opacity, so it sits on a
   page rather than over it. On the front page it has no plate at all — the
   photograph is the plate, and the tone is tuned against it instead. */
.hdr[data-plate="1"]{
  background:color-mix(in srgb, var(--bg) 82%, transparent);
  border-bottom:1px solid var(--ink-hair);
  backdrop-filter:saturate(1.2) blur(9px);
}
/* Hides on the way down, returns on the way up, and is always there at the
   top. A brand image is never permanently interrupted; the way out is one
   upward flick away. */
.hdr[data-hide="1"]{ transform:translateY(-102%) }
@media (prefers-reduced-motion: reduce){ .hdr{ transition:none } }

/* Bigger, heavier, tighter. The contrast was already 7.2-10.8:1 at p=0; what
   made it hard to read was 10.56px at weight 300 tracked out to 3.59px, which
   is a label, not navigation. Same treatment on every page. */
.hdr__mark{ font-size:.82rem; font-weight:400; letter-spacing:.19em; text-indent:.19em;
  text-transform:uppercase; white-space:nowrap }
.hdr__mark b{ font-weight:300 }
.nav{ display:flex; gap:clamp(18px,2.4vw,42px); align-items:center }
/* DIM BY INK, NOT BY OPACITY. These carried opacity .82, and B2B .62, which
   dims type against WHATEVER is behind it — and over the opening that is
   unknown and changing. Measured on the plate: 2.23:1 for the four, 1.80:1 for
   B2B. A mix toward the ground is the same visual step and it is a colour, so
   it can be measured. */
/* DIM BY INK, NOT BY OPACITY, AND ONLY WHERE THE GROUND IS KNOWN.
   These carried opacity .82, and B2B .62, which dims type against WHATEVER is
   behind it — and over the opening that is a photograph that changes every
   frame. Measured on the plate: 2.23:1 for the four, 1.80:1 for B2B.

   Two further things, both measured rather than assumed:

   · currentColor inside color-mix() in a `color` declaration does not track a
     changing inherited colour. When --hdr-ink flipped to white at p 0.5 the
     items kept the rgb(51,51,51) they had resolved at p 0 — 1.54:1. The mix
     reads a VARIABLE now, never currentColor.

   · dimming toward --bg is only meaningful on a flat, known ground. Over the
     photograph there is no such ground, so nothing is dimmed there: every item
     takes the full derived ink, and the hierarchy is carried by the current
     item's rule instead of by tone. */
.nav a{
  position:relative; font-size:.74rem; font-weight:400;
  letter-spacing:.15em; text-indent:.15em;
  text-transform:uppercase; padding-block:.4em;
  color:inherit;
  transition:color .4s var(--ease);
}
/* Dimmed only where the ground is a flat, known plate. On the plate the
   header's own colour is --ink, so the mix reads a palette variable and never
   a script-updated one. */
.hdr[data-plate="1"] .nav a,
body:not(:has(.opening)) .nav a{ color:color-mix(in srgb, var(--ink) 80%, var(--bg)) }
.nav a:hover,
.nav a[aria-current="page"]{ color:inherit }
.nav a::after{
  content:""; position:absolute; left:0; right:0; bottom:0; height:1px; background:currentColor;
  transform:scaleX(0); transform-origin:left; transition:transform .5s var(--ease);
}
.nav a:hover::after,.nav a[aria-current="page"]::after{ transform:scaleX(1) }
/* opacity is no longer how anything here is dimmed — see .nav a above */
/* ---- the one link that leaves the site ----------------------------------
   B2B is the SpySystem ordering portal — a customer utility, not another
   chapter of the story, so it is set apart rather than dressed up. A hairline
   before it, a small mark after it, and a quieter weight than the internal
   links. Quiet, not a button: nothing here should read as a call to action
   bolted onto an editorial header.

   The separator follows the axis it is in — a left edge in the horizontal
   header nav, a top edge in the stacked burger menu and footer column.

   It never takes the current state. rdl.js skips [data-external], and the
   selectors below carry no aria-current case, so there is no path by which it
   can be marked as the page you are on. */
/* .nav a already sets opacity:.82 and is the more specific selector, so the
   quieter weight has to be claimed at the same level or it silently loses —
   measured, the first attempt computed .82, identical to its neighbours. */
.nav a.nav__out{ padding-left:clamp(14px,1.8vw,30px);
  border-left:1px solid var(--ink-hair) }
.hdr[data-plate="1"] .nav a.nav__out,
body:not(:has(.opening)) .nav a.nav__out{
  color:color-mix(in srgb, var(--ink) 76%, var(--bg)) }
.nav a.nav__out:hover{ color:inherit }
.out__mark{ font-size:.82em; margin-left:.7em; vertical-align:.06em;
  display:inline-block; transition:transform .45s var(--ease) }
.nav__out:hover .out__mark,
.foot__out:hover .out__mark{ transform:translate(1px,-1px) }
.menu .nav__out{ border-left:0; border-top:1px solid var(--ink-hair);
  padding-left:0; padding-top:.42em; margin-top:.42em; opacity:.62 }
.menu .out__mark{ font-size:.5em; margin-left:.5em; vertical-align:.5em }
.foot__out{ border-top:1px solid var(--ink-hair); padding-top:.85em; margin-top:.2em;
  color:var(--ink-faint) }
.foot__out:hover{ color:var(--ink) }

.hdr__burger{ display:none; width:26px; height:12px; position:relative }
.hdr__burger i{ position:absolute; left:0; right:0; height:1px; background:currentColor; transition:transform .5s var(--ease) }
.hdr__burger i:first-child{ top:0 } .hdr__burger i:last-child{ bottom:0 }

/* full-screen menu (small screens) */
.menu{
  position:fixed; inset:0; z-index:55; background:var(--bg); color:var(--ink);
  display:grid; align-content:center; gap:.2em; padding:var(--shell);
  opacity:0; pointer-events:none; transition:opacity .5s var(--ease);
}
.menu[data-open="1"]{ opacity:1; pointer-events:auto }
.menu a{ font-size:clamp(2rem,9vw,3.4rem); font-weight:200; line-height:1.24; letter-spacing:-.01em }
.menu .label{ margin-top:2.4em }
/* The way home, and set apart from the sections rather than filed among them:
   it is where you came from, not a section of the site. Smaller and tracked
   like the wordmark in the bar, so it reads as the same thing. */
.menu__home{
  font-size:clamp(.82rem,3.4vw,1rem) !important; letter-spacing:.19em;
  text-transform:uppercase; color:var(--ink-soft);
  padding-bottom:1.1em; margin-bottom:.6em; border-bottom:1px solid var(--ink-hair);
}
.menu__home b{ font-weight:300; color:var(--ink-faint) }
.menu__home[aria-current="page"], .menu__home:hover{ color:var(--ink) }

/* Solid ink. On the room's ground there is nothing to invert against, so the
   difference blend and the dark scrim that propped it up on black are both
   gone — it sits on the ground the way a sign sits on a wall. 13.13:1. */
.wordmark{
  position:fixed; top:clamp(20px,2.8vh,34px); left:var(--shell); z-index:60;
  display:flex; gap:.3em; align-items:baseline;
  font-size:clamp(.82rem,1.05vw,.95rem); font-weight:400;
  letter-spacing:.3em; text-indent:.3em;
  text-transform:uppercase; color:var(--ink);
  transition:opacity .45s var(--ease);
}
.wordmark:hover,.wordmark:focus-visible{ opacity:.62 }

/* --- locations and contact ------------------------------------------------
   A section that lifts off the ground without leaving the palette. This
   replaces .tone-light on the live pages: that block pins its own light
   values, so it ignored the room tokens entirely and stayed a pale plate on
   a dark ground. .tone-light is left defined for the parked home draft. */
.tone-plate{
  background:var(--bg-plate); color:var(--ink);
  /* The faint and soft tiers were solved against the page ground, and the
     plate is a step away from it — so inside a plate section they lose the
     ratio they were built to hold. Measured before this: faint 4.34:1 on
     Painted brick and 3.87:1 on Charcoal, both under the 4.5 floor.
     Mixing toward --room-ink corrects in both directions: on a light ground
     the ink is dark and the text darkens, on Charcoal the ink is light and
     the text lightens, which is what a lighter plate needs. One pair of
     values covers all six palettes — the worst case is Charcoal, and at
     these fractions it lands at 4.7 and 5.1. */
  --ink-faint: color-mix(in srgb, var(--room-faint) 78%, var(--room-ink));
  --ink-soft:  color-mix(in srgb, var(--room-secondary) 76%, var(--room-ink));
}

/* One address, Gentofte, at one size. There used to be a second city stacked
   under it at a smaller size, and these rules were the hierarchy between the
   two; since 9 Oct 2026 there is only one showroom, so .addr--secondary and
   .loc--secondary are gone rather than left behind unused. */
.addr{ font-style:normal }
.addr--primary{
  margin:.7em 0 0;
  font-size:clamp(1.15rem, 2.1vw, 1.9rem); font-weight:300;
  line-height:1.5; color:var(--ink);
}

.foot__addr{ font-style:normal }

/* --- case study ------------------------------------------------------------
   Scroll-driven, in the site's own system. Same tokens, grid and type scale
   as the brand pages; the frame rules are the brand pages' rules. */
.case__kicker{ font-size:.6rem; letter-spacing:.34em; text-indent:.34em;
  text-transform:uppercase; color:var(--ink-faint) }
.case__title{
  margin:.5em 0 0; font-weight:200; line-height:.94;
  font-size:clamp(2.2rem,6.4vw,5.4rem); letter-spacing:-.012em; color:var(--ink);
}
.case__title i{ font-style:normal; color:var(--ink-soft) }
/* The two activations, side by side and equal. A card rather than a line in a
   list: CIFF has no picture to lead with yet, so what separates them is the
   type and the rule above it. */
/* The vertical film beside the case title: it runs on arrival, so it holds its
   own 9:16 rather than being stretched across a width it was never shot for. */
/* IT TAKES THE PAIR'S OWN FOOTPRINT. At its native 9:16 in four columns it
   was 422x751, and a 9:16 film cannot grow on a 900px screen without either
   overflowing it or being cropped — so it is cropped, in the same 3:4 frame
   the two photographs above it use. The crop favours the upper part of the
   frame, which is where the film's subject is. */
.evfilm{ margin:0; align-self:start;
  /* IT HAS TO BE WHOLE ON THE FIRST SCREEN. Measured at 1440x900 it began at
     y=170 and ran 153px past the fold, caption included, so arriving on the
     page meant scrolling to see the end of it.

     The cap is on the FIGURE'S WIDTH, derived from the height actually left
     below the header — 3/4 of it — rather than on the video's height. Capping
     the height with a full-width video would have kept the width and squashed
     the box towards square, and a 9:16 film cover-cropped into a square loses
     most of its frame. This way it keeps its 3:4 and simply takes what the
     screen has. */
  /* 215, not 200: at 1440x900 the caption cleared the fold by 7px, which is
     not clearance, it is luck. This leaves about 22.

     The width also stops at the film's own 576px — margin-inline:auto sizes
     the figure to its content — so a tall screen makes it no bigger than the
     footage actually is. */
  --evfilm-room:calc(100svh - 215px);
  max-width:calc(var(--evfilm-room) * 3 / 4); margin-inline:auto }
.evfilm video{ display:block; width:100%; height:auto; aspect-ratio:3 / 4;
  object-fit:cover; object-position:50% 42%; background:var(--bg-plate) }
.evfilm__k{ display:block; margin-top:.9em; font-size:.605rem; letter-spacing:.3em;
  text-indent:.3em; text-transform:uppercase; color:var(--ink-faint) }
@media (max-width:820px){
  /* grid-column:auto took ONE of the twelve columns and the film came out
     67px wide. It spans the row here. */
  .evfilm{ grid-column:1 / -1; margin-top:clamp(24px,4vh,44px) }
  .evfilm video{ max-width:min(72vw, 420px); margin-inline:auto }
}

/* A set too small to drift: laid out plainly, each picture once. */
/* Full width, like the Le Fix strip, but standing still: with four frames a
   drifting row has to repeat itself to wrap, and that is the repetition this
   set had to lose. */
/* A SET TOO SMALL TO SCROLL: a row on the page's own twelve columns.
   This has been wrong three times. Auto-fit 1fr gave two frames half the page
   each -- 645x860, the same size as the lead pair above, so the case read as
   one wall repeated down the screen. Capping the track at 420 fixed the size
   but packed both against the left edge with the right half empty. Staggering
   them fixed the hole and made the page look scattered, which is what Emilio
   said next: "nu er det bare lidt rodet", 1 Oct 2026.
   What was actually missing was alignment. Four columns each, starting at 1, 5
   and 9, on one baseline: the frames are small, the row spans the full measure,
   and every edge on the page lines up with every other. */
.evgrid{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap);
  padding-inline:var(--shell); align-items:start }
.evgrid > *{ grid-column:span 4 }
/* Two frames go to the two outer edges rather than sitting together at the
   left with the right half empty. Same four columns, same baseline, and the
   air between them is symmetry instead of a leftover. */
.evgrid > :first-child:nth-last-child(2) ~ *{ grid-column:9 / span 4 }
@media (max-width:820px){
  /* BOTH SELECTORS, not just the plain one. A media query adds no
     specificity, so `.evgrid > *` here does not outrank
     `:first-child:nth-last-child(2) ~ *` above it, and the second frame kept
     its desktop placement on a phone: measured at 390, it was 107px wide at
     x 263 while everything around it was 350. The same trap took the margin
     on this element once already. */
  .evgrid > *,
  .evgrid > :first-child:nth-last-child(2) ~ *{ grid-column:1 / -1 }
  .evgrid > * + *{ margin-top:clamp(22px,3.4vh,38px) }
}

/* ---- the way onward, on a case page and on a brand page ------------------
   Emilio, 19 Oct 2026: an event should step to the next event the way a brand
   steps to the next brand -- "der skal ikke listes alle events på et event."
   So the bar of other cases is gone and this is the one device for both.

   IT LIVES HERE AND NOT IN brand-page.css. It was written for the brand pages
   and only they loaded it; the case pages have carried a .bpnav at their foot
   since 30 Sep with no rule to style it, which is why that link has been a
   bare line of text all along. One definition, both pages, and the brand
   pages render byte for byte as before -- nothing in the block changed, it
   only moved to the stylesheet every page already loads.

   WHAT WAS DELETED WITH IT: .case__card, .casebar and .casebar__wrap, the
   bar that listed every other activation under the hero. Nothing uses them
   now, so they are not left behind to rot. */
/* ---- the way onward ------------------------------------------------------
   A brand page used to end. Previous and next by name, the position as the
   sequence counts it, and a route back to all of them — labelled so it reads
   as "all brands" rather than as an undo. */
.bpnav{
  grid-column:1 / -1;
  display:grid; grid-template-columns:1fr auto 1fr; gap:var(--gap);
  align-items:center; margin-top:var(--chapter);
  padding-top:clamp(24px,3.4vh,44px); border-top:1px solid var(--ink-hair);
}
.bpnav a{ display:grid; gap:.5em; text-decoration:none; color:inherit }
.bpnav__next{ justify-items:end; text-align:right }
.bpnav__all{ justify-items:center; text-align:center }
.bpnav__k{
  font-size:.58rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase;
  color:var(--ink-faint); transition:color .4s var(--ease);
}
.bpnav__n{
  font-size:clamp(1.1rem,2.2vw,1.7rem); font-weight:200; line-height:1.2;
  transition:transform .45s var(--ease);
}
.bpnav__pos{ font-size:.7rem; letter-spacing:.24em; color:var(--ink-soft);
  font-variant-numeric:tabular-nums }
/* The × in "GUESS Jeans × Le Fix" is an <i>, and it is a separator, not an
   emphasis. Every other place the case names appear already says so --
   .case__title i, .evcard__t i -- and the deleted .case__card-t i was the
   third. No brand name carries an <i>, so this only reaches the cases. */
.bpnav__n i{ font-style:normal; color:var(--ink-soft) }
.bpnav a:hover .bpnav__k{ color:var(--ink) }
.bpnav a:hover .bpnav__n{ transform:translateX(4px) }
.bpnav__next:hover .bpnav__n{ transform:translateX(-4px) }
@media (max-width:820px){
  .bpnav{ grid-template-columns:1fr; gap:clamp(18px,3vh,30px); text-align:left }
  .bpnav__next{ justify-items:start; text-align:left }
  .bpnav__all{ justify-items:start; text-align:left }
}
@media (prefers-reduced-motion: reduce){
  .bpnav a:hover .bpnav__n{ transform:none }
}


/* ---- the events landing --------------------------------------------------
   One card per activation: its own lead picture, a row of small frames under
   it, the name and one line. No dates, no descriptions -- the case page has
   those. Two up on a desktop, one on a phone; the row of frames scrolls with
   the card rather than on its own, because a card is one thing to click. */
.evcards{ display:grid; gap:clamp(34px,5vw,64px);
  grid-template-columns:repeat(auto-fit, minmax(420px, 1fr)) }
.evcard{ display:block; text-decoration:none; color:inherit;
  border-top:1px solid var(--ink-hair); padding-top:1.1em;
  transition:border-color .45s var(--ease) }
.evcard:hover{ border-color:var(--ink-soft) }
.evcard__lead{ display:block; overflow:hidden; background:var(--bg-plate);
  aspect-ratio:3 / 2 }
.evcard__lead img{ width:100%; height:100%; object-fit:cover; display:block }
.evcard__row{ display:grid; grid-auto-flow:column; grid-auto-columns:1fr;
  gap:clamp(6px,.8vw,12px); margin-top:clamp(6px,.8vw,12px) }
.evcard__row img{ width:100%; aspect-ratio:1 / 1; object-fit:cover; display:block;
  background:var(--bg-plate) }
.evcard__t{ display:block; margin-top:1em;
  font-size:clamp(1.25rem,2.1vw,1.9rem); font-weight:200; line-height:1.12;
  letter-spacing:-.01em; color:var(--ink) }
.evcard__t i{ font-style:normal; color:var(--ink-soft) }
.evcard__m{ display:block; margin-top:.7em; font-size:.8rem; color:var(--ink-soft) }
.evcard:hover .arw{ transform:translateX(.28em) }
@media (max-width:820px){ .evcards{ grid-template-columns:1fr } }

/* a principle's heading: the numeral carries the weight, so this sits quiet
   under it and hands straight on to the body */
.prin__t{ margin:.9em 0 .55em; font-size:clamp(1.05rem,1.5vw,1.32rem);
  font-weight:200; line-height:1.24; letter-spacing:-.005em; color:var(--ink) }

.case__facts{ display:grid; gap:clamp(18px,2.4vw,40px);
  grid-template-columns:repeat(auto-fit,minmax(150px,1fr)); margin-top:clamp(30px,5vh,60px) }
.case__fact b{ display:block; font-weight:400; font-size:.94rem; color:var(--ink); margin-top:.5em }

/* A figure that is an estimate says so in the same breath. The qualifier is
   part of the number, not a footnote — see PROJECT-HANDOVER §4j. */
.stat{ margin:0 }
.stat__n{ display:block; font-weight:200; line-height:1;
  font-size:clamp(2.4rem,5.6vw,4.4rem); color:var(--ink); letter-spacing:-.01em }
.stat__k{ display:block; font-size:.58rem; letter-spacing:.3em; text-indent:.3em;
  text-transform:uppercase; color:var(--ink-faint); margin-bottom:.7em }
.stat__q{ display:block; margin-top:.9em; max-width:34ch;
  font-size:.82rem; line-height:1.6; color:var(--ink-soft) }

/* The image set moves sideways under the reader's own control — a rail, not a
   grid. Native overflow keeps it keyboard- and trackpad-native. */
.rail{ display:flex; gap:clamp(10px,1.4vw,22px); overflow-x:auto; overflow-y:hidden;
  scroll-snap-type:x mandatory; scroll-padding-left:var(--shell);
  padding-bottom:1.2em; scrollbar-width:thin }
.rail:focus-visible{ outline:1px solid var(--ink); outline-offset:8px }
.rail__i{ flex:0 0 auto; scroll-snap-align:start; margin:0 }
.rail__i img{ display:block; height:clamp(320px,52vh,620px); width:auto;
  background:var(--bg-plate) }
.rail__cap{ margin-top:.7em; font-size:.58rem; letter-spacing:.28em;
  text-transform:uppercase; color:var(--ink-faint) }

/* Two cuts, two shapes. The point is that they are different, so they are
   shown at their real aspect ratios side by side rather than normalised. */
.cuts{ display:grid; gap:clamp(20px,3vw,52px); align-items:end;
  grid-template-columns:minmax(0,1fr) minmax(0,.52fr) }
@media (max-width:820px){ .cuts{ grid-template-columns:1fr } .case__facts{ gap:20px } }
.cut img{ width:100%; display:block; background:var(--bg-plate) }
.cut__k{ display:block; margin-top:.8em; font-size:.58rem; letter-spacing:.28em;
  text-transform:uppercase; color:var(--ink-faint) }

/* --- services: six strands -------------------------------------------------
   A structure, not a list and not cards. The full-width hairlines are the
   only furniture: they stack, and the eye runs down them. Title and ordinal
   sit left, the prose sits right on the page's own 12-column grid, so a
   strand reads as one horizontal band rather than a tile. */
.strands{ margin-top:clamp(38px,6vh,80px); border-top:1px solid var(--ink-hair) }
.strand{ padding-block:clamp(30px,4.6vh,66px); border-bottom:1px solid var(--ink-hair) }
.strand__n{
  display:block; font-size:.58rem; letter-spacing:.3em; text-indent:.3em;
  text-transform:uppercase; color:var(--ink-faint);
}
.strand__t{
  margin:.7em 0 0; font-weight:300; line-height:1.14;
  font-size:clamp(1.15rem,2.05vw,1.72rem); color:var(--ink); max-width:15ch;
}
.strand__b{ margin:0; max-width:58ch }
.strand__b + .strand__b{ margin-top:1.1em }
@media (max-width:820px){
  .strand__t{ max-width:none }
  .strand__b{ margin-top:1.2em }
}

/* --- footer ---------------------------------------------------------------- */
.foot{ border-top:var(--hair); padding-block:var(--step) calc(var(--step) * .6) }
.foot__grid{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap) }
.foot__mark{ grid-column:span 5; font-size:clamp(1.5rem,3.4vw,2.7rem); font-weight:200; line-height:1.06 }
.foot__col{ grid-column:span 2; display:grid; gap:.85em; align-content:start }
.foot__col a,.foot__col span{ font-size:.72rem; letter-spacing:.06em; color:var(--ink-soft) }
.foot__col a:hover{ color:var(--ink) }
.foot__base{
  margin-top:var(--step); padding-top:1.6em; border-top:var(--hair);
  display:flex; flex-wrap:wrap; gap:1.4em 2.4em; justify-content:space-between;
}

/* --- reveal --------------------------------------------------------------- */
[data-rv]{ opacity:0; transform:translateY(26px); transition:opacity 1s var(--ease), transform 1.15s var(--ease) }
[data-rv="line"]{ transform:translateY(0) scaleX(0); transform-origin:left; transition:transform 1.3s var(--ease) }
[data-rv].is-in{ opacity:1; transform:none }
[data-rv="line"].is-in{ transform:scaleX(1) }
@media (prefers-reduced-motion: reduce){
  [data-rv]{ opacity:1 !important; transform:none !important }
}

/* --- page veil (transitions) ---------------------------------------------- */
/* .2s, down from .5s by way of .26s, and it is half of a pair: rdl.js hands
   the browser the next page 180ms after the click, and this fade has to be
   finished by then or the old page shows through at the moment it is
   replaced. Change the two together. Emilio, 12 Nov 2026, on the difference between this site on his
   machine and the same files on a host: "at den er hurtig og naar man klikker
   at man ryger direkte ind paa noget." */
.veil{
  position:fixed; inset:0; z-index:90; background:var(--bg); pointer-events:none;
  opacity:0; transition:opacity .2s var(--ease);
}
.veil[data-on="1"]{ opacity:1 }

/* --- grain ---------------------------------------------------------------- */
.grain{
  position:fixed; inset:0; z-index:80; pointer-events:none;
  background-image:url("../ui/grain.png"); background-size:170px 170px;
  opacity:.028; mix-blend-mode:multiply;
}

/* --- shared components ----------------------------------------------------- */

/* index rows — brands, cases, anything enumerable */
.rows{ border-top:var(--hair) }
.row{
  display:grid; grid-template-columns:5rem 1fr auto; gap:var(--gap); align-items:center;
  padding-block:clamp(20px,2.6vh,34px); border-bottom:var(--hair);
  position:relative; transition:padding-left .6s var(--ease);
}
.row:hover{ padding-left:1.2rem }
.row__n{ font-size:.62rem; letter-spacing:.2em; color:var(--ink-faint) }
.row__t{ font-size:clamp(1.3rem,3.1vw,2.5rem); font-weight:200; letter-spacing:-.01em; line-height:1.06 }
.row__m{ display:flex; gap:clamp(12px,2vw,32px); align-items:baseline }
.row__m span{ font-size:.605rem; letter-spacing:.24em; text-transform:uppercase; color:var(--ink-faint); white-space:nowrap }
.row__peek{
  position:absolute; left:38%; top:50%; width:clamp(104px,8.6vw,146px);
  aspect-ratio:3/4; transform:translateY(-50%) scale(.94); opacity:0; pointer-events:none;
  transition:opacity .5s var(--ease), transform .7s var(--ease); z-index:2;
}
.row:hover .row__peek{ opacity:1; transform:translateY(-50%) scale(1) }

/* horizontal scroll rail */
.rail{
  display:flex; gap:var(--gap); overflow-x:auto; scroll-snap-type:x proximity;
  padding-bottom:1.6em; scrollbar-width:thin; scrollbar-color:var(--ink-hair) transparent;
}
.rail::-webkit-scrollbar{ height:1px }
.rail::-webkit-scrollbar-thumb{ background:var(--ink-hair) }
.rail > *{ flex:0 0 clamp(240px, 27vw, 420px); scroll-snap-align:start }

/* sticky two-column: media sticks, text scrolls */
.stick{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap); align-items:start }
.stick__media{ grid-column:span 6; position:sticky; top:14vh }

/* THE CHAPTER THAT FOLLOWS THE OPENING PICTURE SITS CLOSER TO IT. Emilio,
   23 Oct 2026. A full chapter above it put 230px between the hero's caption
   and the next frame and the opening picture read as orphaned. Only the top
   is halved: the bottom keeps the rhythm every other chapter has. */
.chapter--close{ padding-top:clamp(24px,3.4vh,36px) }

/* .roomblk is gone, 6 Nov 2026. It centred the cross-fading frame between
   the opening pair and the rail on the showroom page; Emilio asked for that
   roll to be deleted and nothing else uses the class. The markup and the
   reasoning are in showroom.html's own comment and in the handover. */
.stick__body{ grid-column:8 / span 5; display:grid; gap:var(--chapter) }

/* the two founders, in the sticky slot on About. One picture since 29 Oct
   2026 -- the two of them lifted out of the company photograph and standing
   in front of the building -- with their names beneath it, each under its
   own man: Ugo at the left of the stairs, Lars at the right. .founder__n matches
   .case__fact b, which is what the names were set in before they moved up
   here.
   .founders (two 4:5 portraits side by side) is the arrangement that stood
   here from 6 to 29 Oct and is kept because the two cut-out portraits are
   still built; it costs four lines and makes putting them back markup only. */
.founders{ display:grid; grid-template-columns:1fr 1fr; gap:var(--gap); align-items:start }
.founder{ display:grid }
.founder__n{ font-weight:400; font-size:.94rem; color:var(--ink); margin-top:.5em }
.founder img{ display:block; width:100%; height:auto; margin-top:1.1em }
.founders__one{ margin:0 }
.founders__one img{ display:block; width:100%; height:auto }
/* The names sit under the two men, not at the edges of the frame. They
   THEY USED TO SIT ONE UNDER EACH MAN, and that was right for a montage.
   In it the two of them were PLACED at 17% and 82% across the frame, so a
   name a third of the width wide, pushed to its own side, landed within a
   pixel or two of the man above it.

   12 Nov 2026: the montage is gone and the picture is a photograph of the two
   of them standing together in the doorway. Measured off the new crop by
   tools/build-founders-photo.py, which prints it on every run, they are at
   41% and 53% — a twelfth of the width apart. Two names at those positions
   would be on top of each other, so they are one centred pair with a gap,
   Ugo first because Ugo is on the left in the picture. Nothing else about
   them changes: same type, same label, same order. */
/* The gap is measured, not picked. At 68px the two names sat at 38.9% and
   63.6% of the picture while the men are at 41% and 53%: the pair read as
   wider than the people it names. 30px puts them at about 43% and 60%, which
   is as close as the words themselves allow — "Ugo de Lorenzo" is 110px of
   type on its own. */
.founders__names{ display:flex; justify-content:center;
  gap:clamp(18px,2.2vw,30px); margin-top:1.1em; text-align:center }
.founders__names .founder{ justify-items:center }

/* pull quote */
.quote{ font-size:clamp(1.5rem,3.6vw,3rem); font-weight:200; line-height:1.22; letter-spacing:-.012em; max-width:20ch }

/* stat */
.stats{ display:grid; grid-template-columns:repeat(4,1fr); gap:var(--gap) }
.stat__n{ font-size:clamp(2rem,5vw,4rem); font-weight:200; line-height:1 }
.stat__l{ margin-top:1em }

/* marquee */
.marq{ overflow:hidden; border-block:var(--hair); padding-block:1.5em }
.marq__t{ display:flex; gap:3em; white-space:nowrap; will-change:transform }
.marq__t span{ font-size:clamp(1.1rem,2.4vw,2rem); font-weight:200; letter-spacing:.02em; color:var(--ink-faint) }

/* call to action band */
.cta{ display:grid; place-items:center; text-align:center; gap:2.2em; padding-block:var(--chapter) }

/* forms (concept level) */
.field{ display:grid; gap:.7em; border-bottom:var(--hair); padding-bottom:1em }
.field input,.field textarea,.field select{
  font:inherit; font-size:1rem; font-weight:300; color:var(--ink);
  background:none; border:0; outline:none; width:100%; padding:.2em 0;
}
.field textarea{ resize:vertical; min-height:5em }
.field input::placeholder,.field textarea::placeholder{ color:var(--ink-faint) }
.btn{
  display:inline-flex; align-items:center; gap:1.2em; padding:1.15em 2.2em;
  border:var(--hair); border-radius:0;
  font-size:.62rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase;
  transition:background .5s var(--ease), color .5s var(--ease), border-color .5s var(--ease);
}
.btn:hover{ background:var(--ink); color:var(--bg); border-color:var(--ink) }

/* --- responsive ------------------------------------------------------------ */
@media (max-width:1080px){
  .chead__meta{ grid-column:span 12 }
  .chead__title{ grid-column:span 12; margin-top:1.4em }
  .chead__lede{ grid-column:span 12 }
  /* The 560 cap is a desktop measure. Stacked, 42vw is 164px on a phone,
     which made this frame less than half the hero's 350 -- the same trap
     .phero__one's own override exists for. */
  .stick__media{ grid-column:span 12; position:relative; top:0; max-width:none }
  .stick__body{ grid-column:span 12; gap:var(--step) }
  /* the founders stay two across — a 4:5 portrait at full width is a wall */
  .founders{ gap:clamp(14px,3vw,26px) }
  .stats{ grid-template-columns:repeat(2,1fr); row-gap:var(--step) }
  .foot__mark{ grid-column:span 12 }
  .foot__col{ grid-column:span 4 }
}
@media (max-width:720px){
  .nav{ display:none }
  .hdr__burger{ display:block }
  [class*="col-"]{ grid-column:span 12 }
  .row{ grid-template-columns:2.6rem 1fr; row-gap:.8em }
  .row__m{ grid-column:2 }
  .row__peek{ display:none }
  .foot__col{ grid-column:span 6 }
}

/* --- page hero (inner pages) ------------------------------------------------ */
.phero{ padding-top:clamp(130px,22vh,250px); padding-bottom:var(--step) }
.phero__grid{ display:grid; grid-template-columns:repeat(12,1fr); gap:var(--gap); align-items:end }
.phero__meta{ grid-column:span 3 }
.phero__t{ grid-column:4 / span 9 }
.phero__lede{ grid-column:4 / span 5; margin-top:2.4em }
/* Same rule the chapter heads got: with no label in the margin the title has
   nothing to be indented past, and three empty columns in front of it read
   as a missing element. Retail lost its label on 27 Oct and is the only
   hero in this state today. */
.phero__grid:not(:has(.phero__meta)) .phero__t   { grid-column:1 / span 12 }
.phero__grid:not(:has(.phero__meta)) .phero__lede{ grid-column:1 / span 5 }
/* RETAIL'S TITLE SITS ON THE PAGE'S CENTRE LINE. Emilio, 29 Oct 2026:
   "overskriften skal staa i midten af siden." The lede follows it, because a
   centred title over a paragraph pinned to the left margin reads as a
   mistake rather than as a composition. */
.phero--mid .phero__grid{ text-align:center; justify-items:center }
/* The selector has to out-rank the no-label rule above, which is three
   classes deep and would otherwise keep the lede in columns 1-5. */
.phero--mid .phero__grid:not(:has(.phero__meta)) .phero__t   { grid-column:1 / span 12; width:auto }
.phero--mid .phero__grid:not(:has(.phero__meta)) .phero__lede{ grid-column:1 / span 12 }
.phero--mid .phero__lede .body{ margin-inline:auto }

/* THE SENTENCE STANDS IN THE MIDDLE, AND IT IS SYMMETRIC BY CONSTRUCTION.
   Emilio, 13 Nov 2026: "den skal vaere i midten af overskrift og rullen."

   It was not. Measured at 1440x900 it had 62px above it and 162px below --
   and both numbers were accidents of other rules rather than decisions:

       above   var(--gap) row gap on .phero__grid   23px
             + 2.4em margin-top on .phero__lede     38px
       below   var(--step) padding-bottom on .phero 81px
             + var(--step) padding-top on .chapter--tight  81px

   Four sources, none of them aware of the other three. Centring it by
   arithmetic would mean subtracting one clamp() from another and would come
   apart at the first viewport that resolved them differently.

   So the four are reduced to two, and the two are the same expression: the
   grid's row gap and the hero's bottom padding go to zero, and what is left
   above and below the sentence is var(--step) on each side. Equal at every
   width, with nothing to keep in step by hand. 62/162 becomes 81/81.

   .phero--mid is retail's hero and no other page uses it, so this is scoped
   to that page in everything but name. It has to sit AFTER .phero above,
   which sets the padding-bottom it overrides at the same specificity. */
/* SCOPED TO RETAIL, NOT TO EVERY CENTRED HERO. .phero--mid was retail's
   alone when this was written on 13 Nov 2026; showroom took it the same day
   to centre its title, and showroom's hero holds its two pictures inside the
   same section, so a zero bottom padding and a zero row gap would close gaps
   there that are doing real work. The centring is .phero--mid; the symmetry
   below the sentence is this. */
.phero--lede-mid{ padding-bottom:0 }
.phero--lede-mid .phero__grid{ row-gap:0 }
.phero--lede-mid .phero__lede{ margin-top:var(--step) }

/* A LINE BREAK THAT ONLY EXISTS ON A NARROW SCREEN.
   "Lifestyle from the inside." is one centred line from 1440 down to 820,
   because .phero__t's size is a vw clamp and the heading keeps the same share
   of the measure all the way down — 78% at 1440, 71% at 820. Below that the
   clamp floors and the line stops fitting, and left to itself it wraps to
   "Lifestyle from the" over "inside.", which hangs one word on the second
   line. This puts the break where the sentence has a joint instead.

   THE SPACE BEFORE IT IN THE MARKUP IS LOAD-BEARING. With the <br> set to
   display:none the two text nodes either side of it join, and "Lifestyle"
   and "from the inside." came out as "Lifestylefrom the inside." on the
   first render of this. The markup carries a space before the break; at
   narrow widths it falls at the end of a line and is not drawn. */
.brk-narrow{ display:none }
@media (max-width:820px){ .brk-narrow{ display:block } }

/* The map is a link, so it gets a link's manners and nothing else: no
   underline, and the quiet lift the other framed pictures have on hover. */
.mapfig{ display:block; text-decoration:none }
.mapfig .media{ transition:opacity .45s var(--ease) }
.mapfig:hover .media{ opacity:.9 }
.mapfig:focus-visible{ outline:1px solid var(--ink); outline-offset:4px }
@media (prefers-reduced-motion: reduce){ .mapfig .media{ transition:none } }
.phero__full{ margin-top:var(--step) }
.phero__rot{ grid-column:4 / span 9; margin-top:1.9em }

/* ---- the line that rewrites itself --------------------------------------
   A fixed lead, a phrase that types itself, and a caret. Everything visible
   here is aria-hidden; .rot__sr carries the whole sentence once, and only
   once, so the retyping is never announced. */
.rot{ font-size:clamp(.98rem,1.25vw,1.24rem); font-weight:200; line-height:1.5;
  color:var(--ink-soft); display:flex; flex-wrap:wrap; align-items:baseline; gap:.42em }
.rot__lead{ color:var(--ink-faint) }
.rot__word{ color:var(--ink); display:inline-block; white-space:pre;
  /* min-width is written by the script, measured against the longest phrase,
     so a shorter name cannot pull the caret — or anything laid out after this
     line — sideways as the phrases change. */
  transition:opacity .26s var(--ease) }
[data-rotator-fade="1"] .rot__word{ opacity:0 }
.rot__hold{ display:inline-block; text-align:left; white-space:pre }
/* The caret's -.28em was paying back the flex gap it used to get as a flex
   item of .rot. Inside the holder there is no gap, so the same margin put it
   12px inside the last letter at 42px. Here it sits just after the letter. */
.rot__hold .rot__caret{ margin-left:.08em }
.rot__caret{ display:inline-block; width:1px; height:1.05em; margin-left:-.28em;
  background:var(--ink); transform:translateY(.12em) }
/* It blinks only at rest. A caret that keeps blinking through the typing
   reads as a second, competing rhythm. */
[data-rotator-rest="1"] .rot__caret{ animation:rot-blink 1.06s steps(1,end) infinite }
@keyframes rot-blink{ 0%,49%{opacity:1} 50%,100%{opacity:0} }

/* The sentence assistive tech actually gets. Not display:none — that would
   take it out of the accessibility tree along with everything else. */
.rot__sr{
  position:absolute; width:1px; height:1px; overflow:hidden;
  clip-path:inset(50%); white-space:nowrap; border:0; padding:0; margin:-1px;
}

@media (prefers-reduced-motion: reduce){
  /* No typing, no deletion, and no blink. The phrases still change, by the
     cross-fade above, which is the whole of the motion that remains. */
  .rot__caret{ animation:none !important; opacity:.55 }
}
@media (max-width:820px){ .phero__rot{ grid-column:span 12 } }


@media (max-width:1080px){
  .phero__meta,.phero__t,.phero__lede{ grid-column:span 12 }
  .phero__t{ margin-top:1.2em }
}

/* --- rail card -------------------------------------------------------------- */
.rail-card{ display:block }
.rail-card .media img{ transition:transform 1.2s var(--ease) }
.rail-card:hover .media img{ transform:scale(1.045) }

/* --- filter chips (concept) ------------------------------------------------- */
.chips{ display:flex; flex-wrap:wrap; gap:.6em }
.chip{
  padding:.75em 1.4em; border:var(--hair);
  font-size:.6rem; letter-spacing:.26em; text-indent:.26em; text-transform:uppercase;
  color:var(--ink-faint); transition:color .4s, border-color .4s;
}
.chip[aria-pressed="true"],.chip:hover{ color:var(--ink); border-color:var(--ink) }

/* --- definition table (hours, calendar, credits) ---------------------------- */
.deft{ width:100%; border-collapse:collapse; text-align:left }
.deft th,.deft td{ padding:1.15em 0; border-bottom:var(--hair); vertical-align:top }
.deft th{ font-weight:400; font-size:.6rem; letter-spacing:.26em; text-transform:uppercase; color:var(--ink-faint); width:34% }
.deft td{ font-size:clamp(.9rem,1.05vw,1.02rem); color:var(--ink-soft) }

/* --- the warehouse frame, inside strand 05 ----------------------------------
   Written by tools/build-warehouse.py from Lager/, and absent from the page
   when that folder is empty. It sits in the strand's own text column rather
   than beside the numbered rail, so the list of services keeps its rhythm and
   the picture reads as part of what 05 says rather than a sixth strand.

   The frame is the roll's 4:3 and the roll's cycle.js. Nothing here is new
   except the spacing that separates it from the paragraph above. */
.whs{ margin-top:clamp(26px,3.6vh,46px) }
.whs__t{
  margin:0 0 1em; font-size:clamp(.92rem,1.18vw,1.08rem); font-weight:400;
  letter-spacing:.02em; color:var(--ink);
}
.whs__b{ margin-top:1.15em; max-width:46ch }

/* --- openings: a job folds out of its own line ------------------------------
   Written by tools/build-openings.py from Stillinger/. A <details> is used
   rather than a scripted accordion: it opens with the keyboard, is announced
   as a disclosure, prints open, and works with the script blocked -- and this
   page runs no third-party script at all.

   The row is the site's hairline rule, the same one .deft uses, so a list of
   jobs reads as part of the page rather than as a widget dropped into it.
   The mark is drawn in CSS, not typed, so it never lands in a copied line or
   a screen reader. */
.jobs{ list-style:none; margin:1.2em 0 0; padding:0; border-top:var(--hair) }
.job{ border-bottom:var(--hair) }

.job__s{
  list-style:none; cursor:pointer; position:relative;
  display:flex; flex-wrap:wrap; align-items:baseline; gap:.2em 1.1em;
  padding:1.25em 2.2em 1.25em 0;
  transition:opacity .45s var(--ease);
}
.job__s::-webkit-details-marker{ display:none }
.job__s:hover{ opacity:.62 }
.job__s:focus-visible{ outline:2px solid var(--ink); outline-offset:3px }

.job__t{ font-size:clamp(1rem,1.5vw,1.26rem); font-weight:300; line-height:1.35; color:var(--ink) }
.job__loc{ font-size:.62rem; letter-spacing:.24em; text-transform:uppercase; color:var(--ink-faint) }

/* The + that becomes a -. Two bars, one of which stops being drawn. */
.job__mark{ position:absolute; right:0; top:1.75em; width:11px; height:11px }
.job__mark::before,.job__mark::after{
  content:""; position:absolute; left:0; top:5px; width:11px; height:1px;
  background:var(--ink); transition:transform .5s var(--ease), opacity .5s var(--ease);
}
.job__mark::after{ transform:rotate(90deg) }
.job__d[open] .job__mark::after{ transform:rotate(90deg) scaleX(0); opacity:0 }

.job__body{ padding:0 0 1.9em; max-width:52ch; display:grid; gap:1.1em }
.job__body .body{ max-width:none }
.job__k{ margin-top:.5em }
.job__d[open] .job__body{ animation:jobIn .55s var(--ease) both }
@keyframes jobIn{ from{ opacity:0; transform:translateY(6px) } to{ opacity:1; transform:none } }

/* Stacked, the list would otherwise sit 14px under the mail link and read as
   part of it. It is the other half of the section, not a footnote to the
   first half, so it gets a chapter-sized gap of its own. */
@media (max-width:820px){
  #talents .col-6{ margin-top:clamp(30px,5.5vh,54px) }
}

@media (prefers-reduced-motion: reduce){
  .job__d[open] .job__body{ animation:none }
  .job__mark::before,.job__mark::after{ transition:none }
}

/* --- note: what still needs deciding ---------------------------------------- */
.note{
  border:1px dashed var(--ink-hair); padding:clamp(18px,2.4vw,30px);
  display:grid; gap:.8em;
}
.note__k{ font-size:.58rem; letter-spacing:.3em; text-transform:uppercase; color:var(--ink-faint) }
.note p{ font-size:.88rem; line-height:1.7; color:var(--ink-soft); max-width:60ch }

/* --- content slot ------------------------------------------------------------
   An empty, labelled gap. Used wherever unverified copy was removed: it states
   what belongs there without standing in for it. Never put wording that could
   be mistaken for approved content inside a slot. */
.slot{
  display:grid; gap:.55em; max-width:56ch;
  padding:1em 0 1em 1.3em; border-left:1px dashed var(--ink-hair);
}
.slot__k{ font-size:.58rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase; color:var(--ink-faint) }
.slot__d{ font-size:.86rem; line-height:1.65; color:var(--ink-faint) }
/* A PICTURE THAT HAS NOT ARRIVED IS SHOWN IN THE FRAME IT WILL FILL. The
   ratio class holds the layout so the page has its real shape from the start,
   and the label says what belongs there — a case with no material yet reads as
   one waiting for it, not as a page with holes in it. */
.media > .slot{
  position:absolute; inset:0; max-width:none;
  display:grid; align-content:center; justify-items:center; text-align:center;
  border-left:0; padding:1.6em; gap:.7em;
}
.media > .slot .slot__d{ max-width:40ch }
.slot--display{ padding-block:1.6em }
.slot--display .slot__d{ font-size:clamp(.94rem,1.2vw,1.05rem) }


/* --- the event case ---------------------------------------------------------
   Images lead. The page used to open on two empty text columns and an empty
   diary; the pending slots are still here, but below the pictures, because a
   case with no approved copy is still a case with photographs. */

/* the title sits over a silent loop */
/* Height. The loop is 1280x720 and object-fit:cover scales it by
   max(W/1280, H/720). On any viewport wider than 1280 the width already sets
   that factor, so the box can grow to W*720/1280 = 56.25vw before the height
   starts demanding more scale than the width already does — i.e. the hero can
   get taller for free, using frame that was being cropped away rather than
   enlarging anything. 88vh is the composition; 56.25vw is the quality ceiling;
   min() takes whichever binds first. min-height only ever grows the box, so
   narrow screens keep their content height untouched. */
.evhero{ position:relative; overflow:hidden; isolation:isolate;
  /* 70vh, not 88: Emilio, 21 Sep 2026 -- the other activations under it have to
     be visible from the top of the page, not found by scrolling. At 74vh both
     names ended at 904px against a 900px screen, four pixels short; at 70 the
     whole of both cards is above the fold and the hero still holds its title,
     lede and four facts with room to spare. */
  /* 84vh: Emilio, 21 Sep 2026, again -- more film, and the activations may move
     down for it. The content only comes to 691, so this is the number that
     decides the height now. */
  min-height:min(84vh, 56.25vw);
  /* Emilio, 21 Sep 2026: the film should fill more, down to the line, with the
     activations under it. The padding went back up to a chapter's own, which
     puts the block at 691, and the line is now the bar's top border sitting
     directly under the film rather than a rule floating 124px below it. */
  /* 15.1vh, not 16: the facts' bigger gap (see .evhero .case__facts) added 16px
     to the content, and the block grew past its 84vh with it, pushing the bar
     below down. The padding gives that 16px back, so only the facts moved. */
  /* Not symmetric. Equal margins top and bottom, with the same size hole inside
     the block, read flat -- everything measured 136/126/136. A little more air
     above than below sets the block on the frame instead of floating it:
     152 over 120 at 900px, which is the 1.27 the rest of the page's chapters
     use between their own head and foot. */
  padding-top:clamp(116px,16.9vh,152px);
  padding-bottom:clamp(92px,13.3vh,120px);
  display:flex; flex-direction:column; justify-content:center }
/* One element. The wrap is a cut, and it is meant to be: the window falls on a
   shot boundary in the original edit at both ends. */
.evhero__bg{
  position:absolute; inset:0; z-index:-1;
  width:100%; height:100%; object-fit:cover; filter:saturate(.85);
  /* Punched in 15%: Emilio, 21 Sep 2026, the frame read too wide once the
     block came down to 630. `cover` fills the box by the width here, so the
     whole 1920 frame was on screen and the crowd sat small in it. A static
     scale, not motion -- nothing animates, so there is nothing for
     prefers-reduced-motion to answer for. At 1440 the film is drawn 1656 CSS
     px wide out of 1920, so it is still a reduction at DPR 1. */
  /* PUNCHED IN, AND SET DOWN A CENTIMETRE. The fixed header covers the top 68px
     of the film and was cutting across heads. `object-position` could not fix
     it -- `cover` only leaves 54px of frame outside this box, 16px of it once
     scaled -- so the picture itself is moved down instead.

     5% of 756 is 38px, about a centimetre, and it is paid for out of the
     bottom, where the frame carries least. The scale is what makes the room:
     it leaves 56px of film above and below the block, so a 38px move keeps 18px
     in hand and the top edge can never come into view. */
  transform:translateY(5%) scale(1.15); transform-origin:50% 50%;
}
.evhero::after{ content:''; position:absolute; inset:0; z-index:-1;
  background:linear-gradient(180deg, rgba(0,0,0,.30), rgba(0,0,0,.55)) }
.evhero, .evhero .label, .evhero .case__title, .evhero .body{ color:#fff }
.evhero .case__title i{ color:rgba(255,255,255,.72) }

/* bullets, placed around the pictures rather than stacked in a column */
.pts{ list-style:none; margin:0; padding:0; display:grid; gap:.85em; max-width:34ch }
.pts li{ position:relative; padding-left:1.1em; font-size:clamp(.86rem,1.02vw,1rem);
  line-height:1.62; color:var(--ink-soft) }
.pts li::before{ content:''; position:absolute; left:0; top:.72em;
  width:.42em; height:1px; background:var(--ink-hair) }

/* the strip: a continuous drift, no snapping and no controls */
.strip{ overflow-x:auto; overflow-y:hidden; scrollbar-width:none; -ms-overflow-style:none }
.strip::-webkit-scrollbar{ display:none }
.strip__row{ display:flex; gap:clamp(10px,1.4vw,22px); width:max-content; padding-inline:var(--shell) }
.strip figure{ margin:0; flex:0 0 auto }
.strip img{ display:block; height:clamp(240px,42vh,460px); width:auto;
  background:var(--bg-plate) }
/* Fewer pictures, so they may be bigger -- Emilio, 22 Sep 2026, on the
   Christmas set of four. 50vh against the drifting strip's 42, held to 460 so
   the smallest source in that set (689px wide, straight off LinkedIn) is still
   a reduction at DPR 2 and not an enlargement. */
.strip--wide img{ height:clamp(280px,50vh,460px) }
.strip:focus-visible{ outline:1px solid var(--ink); outline-offset:6px }

/* video placed in the case, each at its own ratio */
.vid{ margin:0; position:relative; background:var(--bg-plate) }
/* The width/height attributes on the element give the UA stylesheet an
   aspect ratio to reserve before metadata arrives. Without them a clip that
   has not loaded yet is laid out in a default 2:1 and jumps when it does —
   measured, the recap sat at 340x150 against a native 9:16. */
.vid video{ display:block; width:100%; height:auto }
.cuts--v .vid video{ aspect-ratio:9 / 16 }

/* ---- the play control ---------------------------------------------------
   A real button over the poster, with a name that says which film it starts.
   It goes on play and returns on pause or end; once running the film has its
   own native controls, so this never competes with them. */
.vid{ position:relative }
.vid__play{
  position:absolute; inset:0; width:100%; height:100%;
  display:grid; place-items:center; gap:.9em; grid-auto-flow:row;
  background:linear-gradient(180deg, rgba(12,11,10,.10), rgba(12,11,10,.42));
  border:0; cursor:pointer; color:#fff;
  transition:background .4s var(--ease);
}
.vid__play:hover{ background:linear-gradient(180deg, rgba(12,11,10,.04), rgba(12,11,10,.30)) }
.vid__play:focus-visible{ outline:1px solid #fff; outline-offset:-4px }
.vid__tri{
  width:54px; height:54px; border-radius:50%; display:block;
  border:1px solid rgba(255,255,255,.72); position:relative;
  transition:border-color .4s var(--ease), transform .5s var(--ease);
}
.vid__tri::after{
  content:""; position:absolute; top:50%; left:52%; transform:translate(-50%,-50%);
  border-left:13px solid #fff; border-top:8px solid transparent; border-bottom:8px solid transparent;
}
.vid__play:hover .vid__tri{ border-color:#fff; transform:scale(1.06) }
.vid__plabel{
  font-size:.58rem; letter-spacing:.3em; text-indent:.3em; text-transform:uppercase;
  color:#fff; text-shadow:0 1px 10px rgba(0,0,0,.5);
}
@media (prefers-reduced-motion: reduce){
  .vid__tri, .vid__play{ transition:none }
  .vid__play:hover .vid__tri{ transform:none }
}
.vid__k{ display:block; margin-top:.8em; font-size:.58rem; letter-spacing:.28em;
  text-transform:uppercase; color:var(--ink-faint) }
.vid__snd{
  position:absolute; right:10px; bottom:10px; z-index:2;
  appearance:none; background:rgba(0,0,0,.55); color:#fff; border:0; cursor:pointer;
  font:inherit; font-size:.54rem; letter-spacing:.24em; text-transform:uppercase;
  padding:.5em .8em; border-radius:2px;
}
.vid__snd:focus-visible{ outline:1px solid #fff; outline-offset:2px }
/* Two vertical cuts, side by side, each at its own 9:16. Capped rather than
   halving the container: a 9:16 filling half of 1440 is 640 wide and 1138
   tall, which is a wall of video, not a pair of phone cuts. */
.cuts--v{ display:flex; flex-wrap:wrap; gap:clamp(18px,2.6vw,44px); align-items:start }
.cuts--v .vid{ flex:0 1 340px; min-width:0 }
@media (max-width:820px){ .cuts--v .vid{ flex:1 1 100% } .pts{ max-width:none } }


/* A picture keeps its own shape. As a grid item the figure was stretching to
   the row's height and the image with it — measured, ev-02 rendered at 0.484
   against a native 1.499, and ev-04 at 0.211 against 0.667. Nothing on this
   page forces a frame ratio; the file's own proportions decide. */
/* RETAIL: one cross-fading roll per house, side by side on one line.
   Emilio, 27 Oct 2026: "rullerne skal ligge paa samme linje og ikke vaere
   skaevt af hinanden." Two equal halves, tops aligned, nothing offset -- the
   staggered pairs that were here before are the thing he is asking against.
   .rshots is the row; each .rroll is a label over a frame. */
.rshots{ display:flex; justify-content:center; align-items:flex-start;
  gap:clamp(70px, 9vw, 130px) }   /* 27 Oct: var(--gap) put 24px between them, then 52, then 2.5x that */
.rroll{ flex:0 1 520px; min-width:0 }
/* A BIT SMALLER, 27 Oct 2026: "goer rullerne lidt mindre". They were half
   the measure each, 645 at 1440. 520 and the pair centred keeps them on one
   line and symmetrical, which is the other half of what he asked for. */
.rroll{ display:grid; gap:.9em; align-content:start }
/* ONE ROLL, 10 Nov 2026. With five houses in a single frame there is no row
   to balance any more, so it takes the middle of the page at the size the
   showroom's own frames use — 560 is what the opening pair and the old
   centred frame were, and the page reads as one picture size throughout. */
.rroll--one{ flex:0 1 560px; margin-inline:auto }
/* The house name centres over its own roll. Emilio, 27 Oct 2026: "wolford og
   simone perele skal staa i midten over rullerne og ikke i hoejre hjoerne."
   They sat at each roll's left edge, which on the right-hand roll reads as
   the right of the page. */
.rroll__k{ text-align:center }
.rroll__f{ min-width:0 }
@media (max-width:820px){
  /* align-items:flex-start is a CROSS-axis rule, and stacked the cross axis
     is the width. Left as it is the rolls shrink to their content, which for
     a figure whose frames are all position:absolute is nothing: they came out
     71px and 119px wide. */
  .rshots{ flex-direction:column; align-items:stretch;
    gap:clamp(24px,4.5vh,44px) }
  .rroll{ flex:0 0 auto }
  /* AND THE SAME TRAP CAUGHT THE SINGLE ROLL, 10 Nov 2026. margin-inline:auto
     is what centres it on the desktop, and on a flex item it also overrides
     align-items:stretch — so stacked, the roll shrank to its content, which
     for a figure whose frames are all position:absolute is nothing: measured
     56px wide at 390. Width stated, margin back to zero. */
  .rroll--one{ flex:0 0 auto; width:100%; margin-inline:0 }
}

.pic{ margin:0; align-self:start }
.pic img{ display:block; width:100%; height:auto }

/* The facts under the case title sit on the film, so they take the film's
   colour. Only the labels were turned white before, and the values under them
   — CLIENT, RETAIL PARTNER, MOMENT — stayed ink and vanished. */
.evhero .case__fact b,
.evhero .case__fact span{ color:#fff }
.evhero .case__fact b{ text-shadow:0 1px 14px rgba(0,0,0,.5) }
.evhero .label{ color:rgba(255,255,255,.86) }
/* The four facts, a notch further down the film -- Emilio, 22 Sep 2026. The
   block is centred in the hero, so the gap has to grow by twice what you want
   to move: 45px to 126 at 900px height moves them 40px down and the title 40
   up, which still leaves the label 146px clear of a 68px header. */
.evhero .case__facts{ margin-top:clamp(80px,14vh,150px) }
/* On a phone the facts are two rows, so the same gap grew the block by 61px and
   dragged the bar with it. A smaller step there: 59px against the old 45. */
@media (max-width:820px){ .evhero .case__facts{ margin-top:clamp(40px,7vh,70px) } }
.evhero .body{ color:rgba(255,255,255,.92) }
